If your dryer drum isn’t turning, you’re probably stuck with a pile of wet clothes and growing frustration. Before calling for appliance repair Escondido services, there are a few steps you can take to figure out what’s going on. Some dryer issues are easy to check and fix, even without tools or technical skills.
Many appliance repair Escondido professionals agree that a dryer that won’t spin doesn’t always mean the motor is dead. In some cases, the issue is as simple as a tripped breaker or a broken door switch. The key is to start with the basic checks before moving on to more involved solutions.
Start by confirming the dryer has power. Check if the control panel lights up or if the unit makes any sounds. If it’s completely dead, you may be dealing with a blown fuse or a tripped circuit breaker. Reset the breaker in your panel and try starting the dryer again.
If your dryer powers on but the drum stays still, open and close the door firmly. Dryers won’t start if the door switch doesn’t register a proper seal. If the light inside the drum doesn’t turn off when the door closes, the switch may be faulty or loose.
Another common reason for a dryer not spinning is a broken drive belt. The belt wraps around the drum and the motor pulley. If it snaps or slips off, the motor will run, but the drum won’t move. To check this, unplug the dryer and try to spin the drum by hand. If it moves too easily, the belt is likely the problem.
A failed drum roller or idler pulley can also cause spin issues. These parts support the drum and help it turn smoothly. If they wear out, they can jam the drum or cause it to make grinding noises. If your dryer makes loud squeaks or thumps before it stopped spinning, this might be the cause.
The motor itself can fail, though it’s less common. A burned-out motor will usually make a humming noise when you press start, but the drum won’t move. In this case, a replacement is often needed, and it’s better handled by a technician.
Sometimes, the control board or start switch is to blame. If pressing the start button does nothing but the lights still work, the switch may be faulty. This part can be tested with a multimeter, but most people prefer to let a pro handle electrical checks.
Always unplug the dryer before inspecting or opening any parts. Safety should come first. If you’ve tried the easy checks and the drum still won’t spin, it’s time to call a trusted repair service.
Dryers stop spinning for several reasons, but not all of them require a new machine. With a few checks, you can often find the cause and get it fixed. If you’re unsure or prefer expert help, reach out to a local appliance repair Escondido technician for a quick solution.
Appliance Repair Escondido